Carbon Speargun Tube With Track C3
%100 carbon speargun barrel with built in track
Speardiver C3 %100 carbon round speargun tube with built in track. The C3 tube is a robust tube with a wall thickness of 3mm. If you're building a Bluewater euro gun with lots of power and need a very stiff tube with enough mass to handle recoil, this is the one for you. It's a straight tube with an inside diameter of 26mm and outside diameter of 32mm. Wall thickness is 3mm. The bottom of the track is 2mm higher than the round tube exterior for a total of 5mm distance from the ID/handle spigot. The tops of the track ridges are 8mm apart and accept up to an 8mm shaft. The tube is not plugged, included with each tube are two rubber plugs which can be used to seal it. If needed more rubber plugs are sold separately.
This carbon tube fits the spigot of (and the tube track lines up with) the following components:
- Any custom build
- Speardiver open muzzle
- Speardiver roller muzzle
- Speardiver Phantom handle and muzzle
- Hammerhead Evolution 2 handle and muzzle
* Some adjustments to the parts may be necessary, such as trimming excess material or reducing the spigot diameter a little by sanding. The spigot will fit and the track will line up.
- Tube plugged. We guarantee no water intrusion. Specify the distance of the plugs from each tube end in the message field at checkout.
- Tube end cut with an angle to fit the Speardiver Phantom or Hammerhead Evolution 2 handles. You can specify this in a message at checkout.
** Please do not contact us for information on how to seal tubes. Rather choose the plug tube option before adding it to the cart and we'll plug it for you at the specified distances.