Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
  • Speardiver Phantom Speargun
Speardiver Phantom Speargun
Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun Speardiver Phantom Speargun video video

Speardiver Phantom Carbon Speargun

60cm - 140cm speargun with carbon barrel and integrated deep track


Length
Bands
Shaft

The Speardiver Phantom railgun comes with an impressive list of features, incorporating the most up to date successful speargun design elements, and a flexible choice of rigging.

Features

  • Ergonomic handle with a reverse euro trigger mechanism, and integrated loading butt for ease of loading.
  • Wide Stainless steel trigger mechanism casing easily accepts shafts with mono attached to the back, without chafing the mono.
  • Trigger mech accepts all standard euro (round notch) stainless steel shafts and South African coated shafts up to 7.5mm diameter.
  • Stainless steel trigger.
  • Stainless steel line release.
  • Stainless steel heavy duty floatline anchoring point at the bottom of the handle.
  • Trigger sensitivity dial adjusts firing pressure from 2lb down to 1lb.
  • Sliding top safety can be easily secured in a permanent unlocked position.
  • Carbon barrel with integrated track. 28mm OD, 26mm ID.
  • Open muzzle with bi-directional line wrap, accepts 3/4" (19mm), 5/8" (16mm) and 9/16" (14m) bands.
  • Rigged with choice of 1 x 19mm, or 2 x 16mm Speardiver small ID rubber bands, and one or two wraps of 300lb or 400lb mono (specify mono confirugration at checkout).
  • Choice of 6.5mm or 7mm stainless steel single flopper pencil point shafts with small sharkfin tabs (7mm shaft has a rest tab), or South African coated single flopper tri-cut 6.5mm or 7mm notched shafts.
  • Muzzle bungee made of synthetic rubber (will not dry rott) and a 400lb stainless steel pigstail snap swivel.
  • Built in reel base plate accpets Speardiver composite reel (sold separately) and other standard composite reels.





Specific References